Angle type globe valve

Product Description:
 J44H / Y-type angular stop valve opening and closing pieces are plug the valve, the sealing surface was flat or cone, the valve along the fluid center line for linear motion. Angle valve, also known as angle valve, the stem of the form of movement, lifting rod (stem lift, hand wheel does not lift), also lift the lever (hand wheel and stem together with the rotation, the nut is located in the body on).

Angle-type globe valve only applies to fully open and fully closed, does not allow for regulation and throttling. Globe valve is a forced sealed valve, so the valve is closed, the valve must be applied pressure to force the sealing surface of the valve does not leak. When the medium from below the valve into the valve, the operating force needed to overcome the resistance is the valve stem and packing friction and thrust generated by the media pressure, off the "angle of the valve" force than the "angle Stop valve "force, so the diameter of the stem to be large, otherwise it will happen stem the fault of the top bend.
 

Applications:
 Angle valve is a commonly used cut-off valve, mainly used to connect or cut off the medium in the pipeline, generally not used to regulate the flow. Globe valves are suitable for pressure, temperature range, but generally for medium and small diameter pipe, suitable for ≤ 425 ℃ steam, oil, water and other media.

Main size and weight:

1.6MPa angle valve main connection size

2.5MPa angle valve main connection size